The hip roofs are more reliable and durable than the flat roofs. Due to the unique design and schema of such roofs, they are less susceptible to water seepages. They incorporate slopes on each side of its architecture which gives them an exemplary schema.

The hips are installed at the meeting point of the two slopes and also along the ridges. Since the hips join the two slopes, it requires an additional cover or cap to prevent any water seepage.

Before you take your first step in the project, apprehend the collection of necessary roofing tools and supplies.

You would primarily require the services of a hand-held hammer and a utility knife. Besides these, the common roofing supplies such as roofing cement, nails and shingles need to be brought in as well. Employ the typical three-tab shingles to cap the hips of roof.

Kick off the assignment by climbing up to the roof. Position yourself comfortably on the roof such that proper space is available to carry out the installation job. Beforehand, prepare caps from the three-tab shingles by cutting them out. Enough care should be taken to ensure similarity between the designs or sizes of all the caps.

Place the first cap on the top of the chosen hip and nail it down with a hand-held hammer. Now, use a measuring tape and a piece of chalk to mark down the boundary of the caps. The first cap is used as a guide in determining the marked line. This particular part of the project requires the involvement of another person to assist you.

Keep the tag line as the outer boundary while installing the remaining caps down the hip. Since the assignment requires frequent movements on the roof, tie yourself to a rope which in turn is attached to a ridge.

Always allow a professional to handle the complications met in the project.

Scott Rodgers is a noted author who has been authoring on roofing contents for a long time now. His unique knowledge has given motivation to a host of workers, ranging from Valles Mines Roofers to Lumber Bridge Roofers.

Tags: , ,